TECHNICAL CHARACTERISTICS
UNIQUE MICROCELL STRUCTURE - HIGH QUALITY PRODUCTION
- State of the art extrusion technology
- Structural mechanical performance on the market
- Unparalleled impact resistance (hard and soft materials)
- Exceptional light diffraction and diffusion capacities
- Dense structure, suitable for cold curving, or thermoforming
- Unequalled aesthetic design
HIGH-SECURITY : DOUBLE NOTCHING
- Reinforced safety gauge
- The very best air and water tightness available
- A guaranteed system in all areas of use (up to zone 4)
- Improved inertia for improved lightness
Panel type Danpalon®
Indicative and non-contractual values
Thickness (mm) |
10 |
12 |
16 |
22 |
Structure |
Multicell (MC) |
Number of walls |
4 |
4 |
6 |
6 |
Width (mm) |
|
|
|
|
Weight of the panel |
2.4 |
2.6 |
3.3 |
3.7 |
Ut (W/m2.K) (according rule Th-BAT) |
2.6 |
2.4 |
1.9 |
1.5 |
Length |
Standard up to 12 m maximum (Longer upon request) |
Chock (performance retention)
Outside : Q4
Inside : O3
Spanning (maximum), value for 600 mm width
Permissible loads corresponding to high pressure under normal wind according to regulation NV65 modified. For more information, please see the load tables in the technical documents.
Indicative and non-contractual values
Tickness (mm) |
10 |
12 |
16 |
22 |
Polycarbonate connector |
1.2 |
1.2 |
1.6 |
1.6 |
Aluminium connector |
2.5 |
2.5 |
2.5 |
2.8 |
High span aluminium connector for facade |
On request |
3,2 |
Slope, bend and impact resistance
Indicative and non-contractual values
Thickness (mm) |
10 |
12 |
16 |
22 |
Minimum slope (connector installed to the outside) |
5° |
Minimum radius for cold bending (m) |
2,00 |
2,50 |
3,00 |
3,50 |
Non-fragility |
PV 1200 joules |