Innovating solutions
for optimal solar and thermal comfort

HIGH PROTECTION

This finishing is especially adapted to facades and partitions at ground level which are at risk of deterioration by the public; repeated knocks; and wilful damage …
The HP (High Protection)  finish significantly enhances the strength of the treated surface against abrasions, scrapes and scratches … It improves and facilitates aggressive cleaning, in the case of graffiti*, by means of specially adapted cleaning products.

*Tests have revealed that some markers or paints can be indelible.

 

Results of mechanical and chemical tests in laboratory conditions

Scratch resistant 

Standard ASTM D-3363-74 (reconfirmed – 1980)

  • Method : Pencil test (standardised test with sharp pointed instrument)
  • Result : HP coating > H9 : result greater than 8 units compared to uncoated Danpalon® HP

Abrasion test

Standard ASTM D-4060-1

  • Method: Taber Abraser
  • Conditions: 100 cycles load 500gr
  • Results:
    • Danpalon® uncoated HP : loss of weight : 50 mg
    • Danpalon® coated HP : loss of weight : 10mg

Surface abrasion test :

-          Standard ASTM D-1044

  • PMethod : Taber Abraser – conditions 100 cycles load 500gr
  • Measuring method : M57 spherical haze meter
  • Results : Δ light dispersion = (diffusion after abrasion – diffusion before abrasion) :
    • Danpalon ® uncoated HP = 23%
    • Danpalon ® coated HP : - Δ = 0%

Durability of HP coating:

under normal climatic stresses :

Standard ASTM G154

  • Method: cycles : 8 hours under UVB – 313 to 50°C C temperature dark side, 4 h under condensation at 50°C.
  • Result: no change observed during the survey up to 6200h.

Light Transmission :

Standard ASTM D – 1003

  • Results :
    • Danpalon® without HP coating: 78.9%
    • Danpalon® with HP coating: 85.5%

Chemical resistance :

Standard ASTM D – 1308 – Open shot

L : flawless after 24 hours - M : flawless after 16 hours -  I : immediate damage – do not use!
CHEMICAL COMPONENTS

DANPALON®
WITHOUT HP FINISH

DANPALON®
WITH HP FINISH

PETROLE L L
TOLUENE I L
ACETONE I L
5% AMMONIA M L
10% CAUSTIC SODA M L

SOFTLITE

Special finishing against glare ensuring visual…

INFRARED TREATMENT

This specific treatment applied to the Danpalon® panels significantly limits…

IRIDESCENT ASPECT

This new iridescent finish catches the light and gives the…

WELDED EDGES

The welded edges provide a clean and effective solution that prevents…

facade   ▪    Vented rainscreen   ▪    roofing   ▪    canopy   ▪    interior

Practical information

ceNorme EN n°16153

cwct

Stay Connected

Contact

Head Office


Everlite Concept UK

  • Unit 11A, Parsons Court, Welbury Way,
    Aycliffe Industrial Park, County Durham, DL5 6ZE
    United Kingdom
  • ukinfo(@)everliteconcept.com
  • T.: +44 (0) 1325 320 374

Newsletter

By continuing to use this site, you accept the use of cookies to enhance your experience.